Technical Specifications - EXTender
TM
3000
System Details
Dimensions
• Size: 8.0" x 8.0" x 1.5"
(205mm x 205mm x 40mm)
• Weight: 2.2 lbs (1 kg)
Operating Environment
• Temperature: 32° - 130° F (0° - 55° C)
• Relative humidity: 5 to 95% (non-condensing)
Key Features
• Call-on-demand
• ACD software compatible
• 32 kbps voice compression
• Software upgradeable via Flash ROM using
the RS-232 port or the ISDN link
• Additional analog port available for second
B channel
PBX/KTS Compatibility
The EXTender 3000 supports leading PBX
protocols including:
• Alcatel: Omni PCX Enterprise and Office
•Avaya
TM
: DEFINITY
®
ECS (release 3 or later)
• Ericsson: MD110 and BP250
• NEC: NEAX2000
TM
NEAX2400
TM
, NEAX2400 IMX
and Electra Elite
• Nortel: BCM, Meridian
®
and Norstar
®
General Set-up Guidelines
• The EXTender 3000 works over ISDN BRI lines and
has an internal line interface.
• For a single user, an EXTender 3000 Switch Unit is
installed at the corporate PBX/KTS and an
EXTender 3000 Remote Unit is installed at the
home office.
• For multiple users, an EXTender 3000 Remote Unit
is installed at each home office. All Remote Units
are connected to either a PBXgateway II1 or an
EXTender Rack.
• Data connection for model T is via a PPP dial up
connection through a DB-9 to RS-232 and the data
rate is Dedicated 57.6 kbps.
• Data connection for model E is via a 10Base-T
Ethernet (ethernet cable included) and the data
rate is a dedicated 64 kbps plus compression.
Connectors Included on Unit
• One RJ-11/RJ-45 for digital phone set
• One RJ-11 for analog device connection
(remote module only)
• One RJ-45 10Base-T Ethernet for PC
connection (optional)
• One DB-9 RS-232 for device management
(both models) and data transmission
(model T only)
• One RJ-45 for ISDN cable
• One power supply
Voice Protocols
• Voice compression algorithm: G.726
(32 kbps ADPCM)
Hardware
• Form factor: Small footprint; desktop or wall
mountable unit
Power Supply
• External adapter (included)
• Line voltage: 120 VAC
• Frequency: 60 Hz
• Maximum power draw: 16 watts
Regulatory Approvals
• NRTL/C (CSA and UL), FCC Part 15 (Class A on
Switch and Class B on Remote), FCC Part 68 and
Industry Canada
Warranty
• One-year limited warranty for parts and labor
including advance replacement when a unit is
shipped back for repair. Effective January 1, 2004,
advance replacement will be included on all prod-
ucts and will be retroactive to products
purchased between January 1 and December
31, 2003.
HOME OR BRANCH OFFICE
CORPORATE OFFICE
MCK EXTender 3000
Remote Module
Optional Analog
modem, fax or
voice over 2nd
B Channel
Public Switched
Telephone
Network
2nd BRI B Channel
(for data)
1st BRI B Channel for voice
Server Connection
(optional)
PC Connection
(optional)
Compatible Digital
Phoneset
MCK EXTender 3000
Switch Module, PBXtender
or EXTender PBXgatway II
PBX
®
®
®
Product specifications subject to change without notice.
*MCK's IP-based products utilize Voice over IP (VoIP) technology to deliver remote voice solutions. The voice quality of these solutions is dependent on variables such as available bandwidth, network
latency and quality of service (QoS) initiatives, all of which are controlled by the network and Internet service providers. Because these variables are not in MCK's control, it cannot guarantee the
performance of the user's IP-based remote voice solution.
Software release 3.1 is required for direct termination of frame relay. MCK, the MCK logo, MCK EXTender, PBXgateway, RVP and RVPoIP are trademarks of Citel Technologies Ltd.
Other brand and product names referenced herein are trademarks of their respective holders.
© 2005 MCK Communications, Inc. 3000-0205
ext_3000_0205.qxp 2/2/2005 4:47 PM Page 2
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern